458 Morden Road. Oakville, Ontario, Canada.
Phone Number: 905-842-6985 Fax Number: 905-842-0226
E-mail Address: info@demesa.ca
Phone Number: 905-842-6985 Fax Number: 905-842-0226
E-mail Address: info@demesa.ca
|
|
|
|
|||||||||||||
 |
 |
 |
 |
|||||||||||||
| Gas detection should not be complicated. The Beacon 110 is gas detection simplified. The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller. | The Beacon 200 is a powerful, low cost fixed system controller for two points of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's most economical two point controller. It is capable of connecting directly to RKI sensors for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. The Beaconª 200 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beaconª 200 housing, or can be wired remotely from the controller. | The Quad Gas II Gas Monitoring System is a central monitoring station linked with up to four (4) remote gas sensors/transmitters. The system can utilize any combination of sensors for monitoring toxic, oxygen or combustible gases. This unit is microprocessor-based, controls and accepts four 4-20mA inputs. Applications for the Quad Gas II Gas Monitoring System include: water and waste water treatment plants, petroleum refining and distribution facilities, chemical processing plants, pulp and paper mills, and enclosed garages or maintenance facilities. | The MSA Z Gard employs a metal oxide solid-state sensor, which is usually used for underground garage monitoring and ventilation control applications. Any of the MSA Z Gard S Sensors operating as a system within the Z Gard Combo Gas Monitor are automatically recognized on a RS-485 network. The 4-20mA analog output can be integrated with PLC, DCS, or building automation systems./td> | |||||||||||||
| DataSheet & Technical Download | DataSheet & Technical Download | DataSheet & Technical Download | DataSheet & Technical Download | |||||||||||||
| Instruction Manual: EN DataSheet: English |
Instruction Manual: EN DataSheet: English |
Instruction Manual: EN DataSheet: English |
Instruction Manual: EN DataSheet: English |